How to Export Revit to Rhino (and Bring Rhino into Revit)

Nine steps in Revit, or one sentence in Mira.

Do it with Mira

From the guide: The Best Revit AI Plugins of 2026

Quick answer

Export from Revit with File tab › Export: DWG for 2D views and sheets, DWG with ACIS solids or STEP for 3D solids, and FBX when materials matter. Rhino can't open RVT files. To bring Rhino into Revit, link the 3DM file with Insert tab › Link panel › Link CAD.

Or, just ask Mira, a free add-in, to export every floor plan to DWG for Rhino.

The manual way

How to do it in Revit

  1. Step 1: Choose the format by what Rhino needs

    Rhino 8 can't open an RVT. Its import list has no Revit format, and no IFC or ACIS (SAT) import either (McNeel: Index of import/export file types). Export a format both programs share instead:

    • 2D linework from plans, sections and sheets: DWG.
    • 3D solids to model on top of: DWG from a 3D view with ACIS solids, or STEP.
    • A render mesh with materials: FBX. OBJ works for a plain mesh.

    Revit lists DWG, DXF, DGN, OBJ, ACIS (SAT), STEP and STL under File tab › Export › CAD Formats. FBX sits under File tab › Export (Autodesk Help: Exporting to CAD Formats; Autodesk Help: Export to FBX).

  2. Step 2: Make a 3D view just for Rhino

    Revit exports what the view shows, so the view is your filter. Set up a 3D view named something like "To Rhino" and hide the categories Rhino doesn't need. Add a section box to export only part of the model (Autodesk Help: Exporting to CAD Formats; Autodesk Help: Export an OBJ File).

    McNeel recommends the same saved view for Rhino.Inside.Revit, since it stores categories, worksets and phase (McNeel: Revit to Rhino). For 2D, export the plan, section or sheet itself.

  3. Step 3: Set the DWG export setup to ACIS solids

    Open File tab › Export › Options › Export Setups DWG/DXF, pick your setup and click the Solids tab. Set Export solids as to ACIS solids. The other choice, Polymesh, writes faces as meshes, and Rhino imports those as mesh objects that don't convert to NURBS (Autodesk Help: Solids for DWG/DXF Export; McNeel: AutoCAD (.dwg, .dxf) import/export).

    On the Units & Coordinates tab, note the One DWG unit is value. Choose Shared if the Rhino model must line up with site coordinates; that only works when you export views, not sheets (Autodesk Help: Units and Coordinates for DWG/DXF Exports). For layer mapping, see how to export Revit to CAD.

  4. Step 4: Export the views to DWG

    Click File tab › Export › CAD Formats › DWG and choose the setup. For Export, pick <current view/sheet only>, or <In session view/sheet set> and select the views. Click Next (Autodesk Help: Export to DWG or DXF).

    In the Export CAD Formats dialog, pick the folder. Set Files of type to AutoCAD 2018 or older, the newest DWG version Rhino 8 reads (McNeel: AutoCAD (.dwg, .dxf) import/export). Clear Export views on sheets and links as external references if you want one file instead of several that reference each other. Click OK.

  5. Step 5: Export FBX when materials matter

    Open the 3D view and click File tab › Export › FBX. If FBX is grayed out, you aren't in a 3D view. In the Export 3ds Max (FBX) dialog, choose FBX Files (*.fbx). Select Use LOD for smoother curved surfaces, and Without boundary edge to drop the lines where surfaces meet (Autodesk Help: Export to FBX).

    Revit's FBX carries render appearances and material assignments, and Rhino reads FBX meshes with their materials and textures (Autodesk Help: Exporting to 3ds Max; McNeel: MotionBuilder (.fbx) import/export). For a plain mesh, use File tab › Export › CAD Formats › OBJ from a 3D view (Autodesk Help: Export an OBJ File).

  6. Step 6: Import the file into Rhino

    In Rhino, click File › Import (or Open) and pick the file. In DWG/DXF Import Options, set Model units to the DWG unit you exported. Rhino keeps the DWG's layer names and colors, keeps blocks as blocks, and brings paper space in as layouts (McNeel: AutoCAD (.dwg, .dxf) import/export).

    For FBX, turn on Prompt to scale on import so Rhino asks when units differ. For STEP, turn on Join surfaces so faces with shared edges join (McNeel: MotionBuilder (.fbx) import/export; McNeel: STEP (.stp; .step) import/export).

  7. Step 7: Link the Rhino model back into Revit

    Save the Rhino model as a 3DM. In Revit, click Insert tab › Link panel › Link CAD and set Files of type to the Rhino 3DM option. Select the file and click Open (Autodesk Help: Link a CAD File; Autodesk Help: About Linking CAD Files). Revit has linked 3DM files since Revit 2022. When the Rhino file changes, reload the link (Autodesk Help: Link Rhinoceros (3DM) Files).

    For Positioning, use Auto - Origin to Origin if you'll relink or bring in several files. Avoid Auto - Center to Center for files you re-import: the center is recalculated, so files may not line up (Autodesk Help: Positioning for Imports and Links).

  8. Step 8: Or import it as a 3D shape with a category

    Click Insert tab › Import panel › Import CAD and set Files of type to Rhino Files (*.3dm). Pick a Category; the default is Generic Models. Choose a room-bounding category such as Walls or Floors if the shape should bound rooms (Autodesk Help: Import a 3D Shape). Revit has imported 3DM files since Revit 2017.1 (Autodesk Help: New in Revit 2017.1).

    Revit builds the import from DirectShape elements. The shape is one element with one category, wireframes don't come in, and you can't edit it in Revit. To change it, edit in Rhino, delete the import and import again (Autodesk Help: About Importing 3D Shapes).

  9. Step 9: Use Rhino.Inside.Revit for a live connection

    Rhino.Inside.Revit is McNeel's add-in that loads Rhino and Grasshopper inside Revit 2018–2027. It needs a licensed Rhino 7, 8 or 9. After installing, click Always Load at Revit's prompt, then Start on the new Rhino.Inside tab (McNeel: Getting Started with Rhino.Inside.Revit). Our Revit plugins guide shows where it fits, and how to install Revit add-ins covers the security prompt.

    McNeel names three ways to send Rhino geometry in. DirectShapes are fastest and suit competitions and early design. Loadable families suit repeated or fabricated pieces. Native Revit elements built from Rhino geometry suit final models (McNeel: Rhino to Revit).

What to watch for

SAT only works one way. Revit exports ACIS (SAT), but SAT isn't on Rhino 8's import list (McNeel: Index of import/export file types). Use it for the trip back instead. Revit imports SAT up to ACIS version 7.0, and Rhino's SAT export writes version 4.0 by default (Autodesk Help: About Importing 3D Shapes; McNeel: ACIS (.sat) Export).

Your export setup becomes Rhino's layer tree. Rhino keeps DWG layer names and colors, and off or frozen layers come in as off layers (McNeel: AutoCAD (.dwg, .dxf) import/export). So your Revit setup's category-to-layer mapping organizes the Rhino model. Fix it once in the setup, not by relayering in Rhino.

Check units on both sides. Revit's DWG unit defaults to inches for imperial projects and millimeters for metric (Autodesk Help: Units and Coordinates for DWG/DXF Exports). A mismatch brings the model in at the wrong scale. Going back, Revit's Import Units option isn't available for 3DM files, so check the Rhino model's units before you save (Autodesk Help: Import and Link Options).

Imported 3DM files don't show in Manage Links. Revit 2026 added imported DWG, DXF, DGN, SKP and AXM files to the Manage Links dialog. 3D-shape imports such as 3DM, SAT and STEP are still left out (Autodesk Help: Show Imported CAD Files in the Manage Links Dialog). If the Rhino design will change, link it so you can find and reload it.

Every desk sends Rhino a different model. Doing it once is easy. Across a firm, each person picks a setup, solids option and units, so the Rhino team gets different layers and scales from each project. When the person who knew the settings leaves, so does the method. Save the DWG export setup in your project template and transfer it to live projects (Autodesk Help: Video: Share DWG Export Setups). On the Rhino side, McNeel suggests a shared scheme file with the -Export command so every Rhino user exports DWG the same way (McNeel: AutoCAD (.dwg, .dxf) import/export). Mira can then export every floor plan with the setup you name, so the setup stays a person's call.

Or, just ask Mira to do it.

Mira is an AI partner for Revit that automates the work you repeat and builds tools your team needs.

  • Type this in Mira

    Export every floor plan to DWG with our AIA export setup, into a folder I'll pick.

    Mira lists the floor plans and the DWG export setups saved in the model, and opens a folder picker instead of guessing a path. The export runs through a small tool Mira writes, which asks Allow first. Exporting writes files only, so nothing in the model changes.

Riverside_Medical_Center_ARCH.rvt — Level 1
FileArchitectureStructureAnnotateAnalyzeViewManagePirros
Level 1 ×A-501 Details3D View
Floor planDWG
Level 1Level 1.dwg
Level 2Level 2.dwg
Level 3Level 3.dwg
Level 4Level 4.dwg
Level 1 - FurnitureLevel 1 - Furniture.dwg
Level 2 - FurnitureLevel 2 - Furniture.dwg
Level 2 - Part Adependent, left out
Level 2 - Part Bdependent, left out
6 DWGs exported, model unchanged
Mira by PirrosLevel 1
Pirros
ChatSkillsHistory
Export every floor plan to DWG with our AIA export setup, into a folder I'll pick.
Reasoning
Thought for 4s
Query(Floor plans, DWG setups)
8 plans, setup AIA
AskForFolder(Export folder)
Folder picked
CreateTool(6 plans, AIA setup)
Allowed, 6 DWGs
DWGs exported6 files
Floor plans exported
6 of 8
Export setup
AIA
Dependent views left out
2
Model
unchanged
Message Mira
Mira can make mistakes. Verify before you commit.
FAQ

Frequently asked questions.

Can't find what you're looking for?
Get in touch.

No. Rhino 8's list of import formats has no RVT or RFA entry. Export from Revit to DWG, FBX, OBJ or STEP and import that file into Rhino. Or run Rhino.Inside.Revit, which loads Rhino inside Revit and reads Revit elements through Grasshopper.

Yes. Revit 2025, 2026 and 2027 can link or import Rhino 3DM files from the Insert tab. Linking arrived in Revit 2022 and lets you reload the file when it changes. Importing has worked since Revit 2017.1 and lets you assign a category, but neither turns the geometry into native walls or floors.

DWG for 2D drawings, and DWG with ACIS solids or STEP for 3D geometry you want to model on. Use FBX when the Rhino model is for rendering and you want Revit's materials along. OBJ is a simpler mesh option. Rhino 8 doesn't import IFC or SAT, so skip those.

FBX and OBJ are mesh formats, and a DWG exported with the Polymesh solids option is mesh too. Rhino imports those faces as mesh objects and doesn't convert them to NURBS. For solids, set the export setup's Solids tab to ACIS solids, or export STEP from a 3D view.

Export FBX from a 3D view. Revit's FBX export carries render appearances and material assignments, and Rhino reads FBX meshes with their materials and textures. A DWG brings layers and colors instead, and Rhino can turn layer colors into materials on import.

Not for a one-off exchange: file export and Link CAD cover that. Rhino.Inside.Revit is for ongoing work, where Grasshopper reads Revit elements or creates DirectShapes, families and native elements. It needs a licensed copy of Rhino 7, 8 or 9 and works with Revit 2018 through 2027.

Two ways in

Try it yourself.
Or bring it to the firm.

The download is free and takes a minute. The firm conversation is where your standards, your library, and your rollout get built. Start wherever makes sense.

Talk to us about your firm