How to Import a Point Cloud into Revit

Nine steps in Revit, or one sentence in Mira.

Do it with Mira

From the guide: The Best Revit AI Plugins of 2026

Quick answer

Revit links indexed point clouds (.rcp or .rcs), not raw scans, so index E57, LAS or other scanner files in Autodesk ReCap first. Then click Insert tab › Link panel › Point Cloud, pick the file, choose a Positioning option such as Auto - By Shared Coordinates, and click Open.

Or, just ask Mira, a free add-in, to set the phases on the walls you model from the scan.

The manual way

How to do it in Revit

  1. Step 1: Index raw scans in ReCap

    Revit links only indexed point clouds: .rcp project files and .rcs scan files. Raw scanner formats such as E57, LAS, PTS, PTX and FARO .fls go through Autodesk ReCap first (Autodesk ReCap Help: Supported File Formats).

    On ReCap's home screen, click New Project, then Import Point Cloud, and name the project and its folder. Select or drag in the scans, review Scan Settings, then click Import Files. Indexing starts on its own (Autodesk ReCap Help: Creating Scan Projects; Indexing). If the scans aren't registered yet, ReCap Pro can stitch them into one cloud (Autodesk ReCap Help: Register Scans).

    ReCap writes .rcs files plus an .rcp that references them but doesn't contain them. Keep them together, or the .rcp can't load (Autodesk ReCap Help: About Scan and Photogrammetry Files and Projects).

  2. Step 2: Put the files on the same path for everyone

    Autodesk recommends each user link from a local copy, to cut network traffic in a workshared model. Revit saves the link relative to the Root path for point clouds. Find it at File tab › Options › File Locations tab (Autodesk Help: Options Dialog: File Locations Tab).

    If every user keeps the files at the same relative path, the link holds when you synchronize with central. Autodesk's example is a folder at `C:\Users\<Username>\Documents\PointClouds` on each machine (Autodesk Help: Insert a Point Cloud File).

  3. Step 3: Make a point cloud workset active

    In a workshared model, give the scan its own workset. Autodesk's advice is to put links in their own worksets and close them when not in use (Autodesk Help: Worksets and Performance).

    Click Collaborate tab › Manage Collaboration panel › Worksets, click New and name it. Clear Visible in all views if you want the cloud only where you turn it on (Autodesk Help: Create Worksets). Then pick it from the Active Workset drop-down on the status bar before you link. If you forget, change the cloud's Workset parameter under Identity Data afterward (Autodesk Help: Reassign an Element to a Different Workset).

  4. Step 4: Link the point cloud

    Click Insert tab › Link panel › Point Cloud. For Files of type, choose Point Cloud Projects (\*.rcp) or Point Clouds (\*.rcs) and select the file. Hold Ctrl or Shift to pick several (Autodesk Help: Insert a Point Cloud File).

    Pick the .rcp when you have one. Each scan location, and any scan region made in ReCap, then gets its own row in Visibility/Graphics (Autodesk Help: Visibility/Graphics for Point Clouds).

  5. Step 5: Choose how to position it

    Under Positioning, pick one option, then click Open (Autodesk Help: Insert a Point Cloud File): - Auto - By Shared Coordinates reads the cloud's coordinates as your model's shared coordinates and turns its north to True North. Use it when the model's shared coordinates match the survey. - Auto - Origin to Origin puts the cloud's (0,0,0) at the Revit project origin and turns its north to Project North. A cloud stored in survey coordinates can land very far from the model. - Auto - Center to Center lines up the centers of the cloud's and the model's bounding boxes. Zoom to fit if you can't see it. - Auto - Origin to Last Placed appears after the first cloud. It places more scans of the same site and coordinate system to match the first, even after you've moved it.

    While the survey origin still sits on the project origin, as it does by default, the first two give the same result.

  6. Step 6: Set the cloud's phase to Existing

    Select the cloud and look under Phasing in the Properties palette. Phase Created defaults to the phase of the view you linked it in (Autodesk Help: Point Cloud Properties). Set it to Existing.

    Revit doesn't display an element in a view whose phase comes before its Phase Created (Autodesk Help: Video: Phase Status). So a cloud linked from a New Construction view won't appear in your existing-phase views. See how to use phases.

  7. Step 7: Set what each view shows

    Type VG, or click View tab › Graphics panel › Visibility/Graphics, and open the Point Clouds tab. Clear Show point clouds in this view to hide them all, or use the Visibility column for single clouds, scan locations or scan regions (Autodesk Help: Visibility/Graphics for Point Clouds).

    In the Color Mode column, a whole cloud can show RGB, Single Color, Elevation, Intensity or Normals. A scan location or region takes only Single Color, which helps tell overlapping scans apart (Autodesk Help: Change Colors for a Point Cloud). Save the settings in a view template to reuse them. More on what drives each view in Revit views.

  8. Step 8: Clip it to the area you're modeling

    Plans, sections and section boxes all cut a point cloud, so you can isolate the part you need (Autodesk Help: About Point Clouds). In a plan, only the slice between the bottom of the view range and the cut plane shows (Autodesk Help: Visibility/Graphics for Point Clouds).

    In a 3D view, select Section Box under Extents in the Properties palette. Select the box and drag its arrows in to one floor or one room (Autodesk Help: Change the Extents of a 3D View).

  9. Step 9: Snap to the scan as you model

    Click Manage tab › Settings panel › Snaps and make sure Snap to Point Clouds is checked. PC is its one-pick override (Autodesk Help: Snaps Dialog).

    Tools such as Wall, Line, Grid, Move and Rotate then snap to planes Revit detects in the cloud, or directly to points. Revit only detects planes perpendicular to the current work plane, near the cursor. Plane snaps come first; press Tab to cycle to a point snap (Autodesk Help: About Point Clouds).

What to watch for

Pin the cloud once it's in place. Click Modify tab › Modify panel › Pin, select the cloud and press Enter (Autodesk Help: Use Pins to Lock Elements in Place). A cloud nudged by accident puts everything traced afterward out of line with what came before.

It's a link, so manage it in Manage Links. Scans run to hundreds of millions of points, so Revit references the file instead of embedding it (Autodesk Help: About Point Clouds). Click Manage tab › Manage Project panel › Manage Links to reload, unload or remove it. In Revit 2025–2027 the dialog groups links in a tree; use its filter to show point clouds. Older guides call this the Point Clouds tab (Autodesk Help: New Manage Links Dialog).

Wrong size? Check the Scale. In the cloud's Type Properties, Scale converts the source units to feet: 3.2808 for meters, 1 for feet. Change it if Revit misread the units (Autodesk Help: Point Cloud Properties).

Turn off Select Links while you trace. Clicking near a wall can grab the cloud instead. Clear Select Links in the Select drop-down under Modify on the ribbon, or with its icon at the lower right of the status bar. You can still snap and align to the cloud (Autodesk Help: Options to Control Element Selection).

Thin the scan before Revit sees it. ReCap's Decimation Grid sets the smallest cube one point can occupy. A larger value imports fewer points and makes a smaller file (Autodesk ReCap Help: Scan Settings). In Revit, close the cloud's workset or unload it when you don't need it (Autodesk Help: Worksets and Performance). More in how to speed up a slow model.

A cloud that loads on one desk can be missing on the next. Linking one scan once is easy. Keeping it working for a team is harder: a desk with a different root path or folder can't find the files. Settle the folder, workset name and phase once and write them into the project setup. Otherwise they leave with whoever set it up. Then comes the repetitive part: every traced wall that's coming out needs its phases set. The AI agent for Revit can set them on a selection of walls in one step, with you approving the change.

Or, just ask Mira to do it.

Mira is an AI partner for Revit that automates the work you repeat and builds tools your team needs.

  • Type this in Mira

    Set the selected walls to Phase Created: Existing and Phase Demolished: New Construction.

    Select the walls first. Mira reads them, tells you which already match, sets the rest in one step after an Allow, and reads each wall back.

Riverside_Medical_Center_ARCH.rvt — Level 1
FileArchitectureStructureAnnotateAnalyzeViewManagePirros
Level 1 ×A-501 Details3D View
Selected wallCreated / Demolished
Partition at grid BExisting / New Constr.
Partition at grid CExisting / New Constr.
Corridor wall, eastExisting / New Constr.
Corridor wall, westExisting / New Constr.
Storage partitionExisting / New Constr.
Exterior wall, northalready set
5 walls existing, demolished in New Construction
Mira by PirrosLevel 1
Pirros
ChatSkillsHistory
Set the selected walls to Phase Created: Existing and Phase Demolished: New Construction.
Reasoning
Thought for 3s
Selection(Walls)
6 walls, 1 already set
Plan(5 walls, 2 phases)
Approved
SetPhases(5 walls)
Set, read back
Phases set5 of 6
Phase Created
New Construction to Existing
Phase Demolished
None to New Construction
Already set
1 wall
Undo
one step
Message Mira
Mira can make mistakes. Verify before you commit.
FAQ

Frequently asked questions.

Can't find what you're looking for?
Get in touch.

Revit links indexed point clouds only: an .rcp project file or an .rcs scan file. Scanner output such as E57, LAS, PTS, PTX or FARO .fls has to be indexed in Autodesk ReCap first. ReCap creates the .rcs files and an .rcp that ties them together.

An .rcs file holds an indexed scan. An .rcp is a small project file that points to a set of .rcs files without containing them. It can't load without them. Linking the .rcp lets you show, hide and color each scan location and ReCap scan region separately in Revit.

Check that Show point clouds in this view is on in the view's Visibility/Graphics, Point Clouds tab. In a plan, only the part between the bottom of the view range and the cut plane appears. A cloud whose Phase Created is later than the view's phase won't show, and point clouds never appear in drafting views or schedules.

The scan is probably stored in survey or geographic coordinates and was placed with Auto - Origin to Origin. Autodesk warns that this can put it very far away. Remove it and link it again with Auto - By Shared Coordinates if your model's shared coordinates match the survey. Otherwise place it with Auto - Center to Center and move it into position.

Linked. A scan can hold hundreds of millions of points or more, so Revit references the file instead of embedding it in the model. That is why it appears in Manage Links, where you reload, unload or remove it, and why every user needs access to the files.

Two ways in

Try it yourself.
Or bring it to the firm.

The download is free and takes a minute. The firm conversation is where your standards, your library, and your rollout get built. Start wherever makes sense.

Talk to us about your firm